LEDgroupbuy

General

• Community Help

  • ★ Lumia 5.2 necessary items
  • ★ What LEDs do I need for a 20 gallon long reef aquarium?
  • ★ What do I need to power the LEDs?
  • ★ What LEDs do I need for a 10 gallon reef aquarium?
  • ★ What do I need to power the Lumia 5.1 LED
  • ★ Do you ship to South Africa? (or any other country?)
  • Lumia 5.2 on 29 gal biocube
  • DIY retro fit old MH to LED
  • storm-x led controller comes with Case ?
  • Can we connect multiple inventronic 42w drivers to the same pot?
  • If i have the LED/s, makersdriver, makerscontroller - what else would i need to buy apart from the heatsink.?
  • how many RB LED 3W, 700mA can i connect on a single channel in series and how many in parallel on a makersDriver.?
  • do i need to manually turn down the makersdriver from 1000mA to 700mA?
  • How many LED of Bridgelux White 3W 10K, 700mA can i connect on a single channel in series and how many in parallel on a makersDriver.?
  • i would like to change some of my white leds on an evergrow fixture, are the brideglux compatible?
  • What size MakersLed heat sink for a 75 gallon full canopy?
  • What LEDs do I need for a 180 gallon tank?
  • What LEDs do I need for a 90 gallon tank?
  • What LEDs do I need for a 29 gallon tank?
  • with the lumia 5.1 what is the smallest heatsink you recommend?
  • What LEDs do I need for a 55 gallon tank?
  • can i hook bridgelux 700ma led to ldd1000h if i use pwm controller ?
  • What LEDs do I need for a 40 gallon Breeder?
  • Is there anyway that I can use this controller without the Makers drivers?
  • What is the width of your heat sink and the total height?
  • What s dimensions and LEDs do I need for a 20 gallon reef aquarium?
  • What is the proper way to use Berguist thermal pads?
  • The CREE XT-Es appear to have a max rating of 1,500mA , but the 3ups only recommend 700mA. Why is the 3up rating so low
  • Hi, I've read a bunch of the DIY builds and I still don't really understand the difference between the Meanwell and Inventronic drivers. Thanks.
  • how do i solder the Ocean Coral White? are each led on the board separate or are they wired up like normal leds and you treat it like one led?

• Tips & Tricks

  • Shipping calculation

• Feature Requests

  • PWM to 0-10v converter