Follow What LEDs do I need for a 29 gallon tank? October 11, 2016 16:07 LEDgroupbuy Community Help What LEDs do I need for a 29 gallon tank? 1 Comments Date Votes Adam Brown September 11, 2013 17:52 The basic rule of thumb to do a reef tank LED setup is about 18 square inches of surface area per CREE XT-E LED (base colors) For a basic 30 gallon tank which is 30x12x18 (LxWxH). This gives us 360 square inches of surface area (LxW). Divide that by how much surface area we want per CREE XT-E LED(18) we 20 LEDs. BASE COLORS: For base colors we recommend Royal Blue and Neutral White at a ratio of 2:1 (Royal Blue to Neutral White) Since our calculation above got us 20 LEDs at a ratio of 2:1 we need 14 Royal Blue and 6 Neutral White CREE XT-E LEDs (or just 6 of our custom 3UP stars using the 2:1 ratio or RB to NW) Thats all! This gives you the base colors you will need that will give you a great overall color and excellent growth. FULL SPECTRUM: If you wanted to do a high end Full Spectrum build you can also add the following to the base colors: We recommend a 6:3:3:1 ratio of Royal Blue to Neutral White to Hyper Violet to Ocean Coral White In our example we already have the 14 Royal Blue and 6 Neutral White CREE XT-E LEDs, all we need to add is 6 Hyper Violet and 3 Ocean Coral White to get to our recommend ratio. A good layout for this setup is two of the following: 2x Royal Blue 1x Neutral White 3UP Star Hyper Violet Ocean Coral White Powering the LEDs Powering LEDs is very straight forward. Have a look at this article on how to power the LEDs above: http://ledgroupbuy.zendesk.com/entries/25177163-What-do-I-need-to-power-the-LEDs- Please sign in to leave a comment.